Commissioning / Site Visit Request

All Aquatech Pressmain products are factory tested before despatch but to get the optimum performance each unit must be commissioned by one of our expert engineers who will also ensure the installation is correct and compliant.

COMMISSIONING BENEFITS INCLUDE:

Protect your Warranty

Each new Aquatech Pressmain unit comes with a 24 months warranty however if the unit isn’t commissioned by our recognised agent this will affect your warranty (see terms & conditions). To ensure your equipment has the best start in life have it commissioned by the experts.

Detailed Installation Check List

A thorough installation checklist to ensure equipment is installed correctly and is compliant with the appropriate regulations.

Adjustment of Settings

To ensure the equipment has the best start in life it is important that all factory settings are checked and adjusted to suit site specific conditions.

Going the extra mile…

Once commissioned by us AGM will provide access to 24/7/365 emergency breakdown cover during the 24 month warranty, (terms and conditions apply). Contact our service team on 01206 215151 for further details.

Did you know…

AGM Service has the largest independent pump specialist service team. We install, commission and maintain not just our own equipment but all manufacturers of pumps and pressurisation equipment. With a team of over 40 directly employed engineers and 4 national service offices, we are widely regarded as THE EXPERTS when it comes to pumps and pressurised systems.

For further details on AGM site services CLICK HERE.

YOU CAN ARRANGE A COMMISSIONING VISIT BY COMPLETING THE REQUEST FORM BELOW.

    *Company name

    *Company address

    *Postcode:

    *Site address

    *Postcode:

    *Telephone:

    Email *

    Fax:

    ORDER NUMBER FOR COMMISSIONING (to be made out to Aquatronic Group Management Plc):

    *EQUIPMENT:

    *SERIAL NUMBER MUST BE SUPPLIED (This can be found on the front of the unit and is prefixed WN, WQ or SN):

    Location of equipment (e.g. boiler room):

    Site Contact:

    Mobile Phone Number:

    Requested date of attendance (normally allow 7 working days):
    Day: Month: Year:

    Details of site induction, if required (we reserve the right to make an additional charge):

    Details of fault (if any):

    (parts fitted/repairs carried out may be subject to additional charge)

    Details of any other special requirements:

    Risk Assessment / Method Statement required: YesNo

    Parking on site: YesNo

    Please note that the unit(s) will be commissioned to the static height of the building. Any additional pressure requirements must be advised prior to commissioning.

    *PRE-COMMISSIONING CHECKS BY CUSTOMER (MUST BE FILLED IN)
    In order for our service engineer to correctly commission the above equipment, please confirm the following have been completed (where applicable):

    *YesNo : Electrical mains supply to unit is permanently connected (i.e. not temporary supply, via generator etc)

    *YesNo : Volt free contacts to BMS connected (only if supplied)

    *YesNo : Pipe work to and from the unit

    *YesNo : Mains water supply is permanently connected

    *YesNo : Nitrogen bottle connected (Where applicable) complete with suitable regulator

    *YesNo : Unit is fitted in accordance with relevant AquaTech Pressmain installation manual

    *YesNo : All permits for work arranged, if required

    *YesNo : Circulating pumps/Boilers/Chillers are ready for use and available to heat/cool system when P/U switched on

    *YesNo : Tank monitoring sensors are installed in tank(s) and wired back to control panel in accordance with the instructions manual provide

    ALL FIELDS MARKED WITH A * MUST BE FILLED IN

    Please note, Should we find that the unit(s)/boilers/chillers/circulating pumps or any of the above are not ready/unavailable/ on the agreed visit date and/or previously unadvised site inductions are required, we reserve the right to make an additional charge for unexpected down time/waiting time or an aborted visit fee.

    Confirmation of site visit request:
    Your Name *

    FOR EACH SITE VISIT, THIS FORM WILL NEED TO BE COMPLETED IN FULL AT LEAST 7 DAYS PRIOR TO THE INTENDED VISIT DATE

    When you submit your data to us it will be sent in encrypted form to help ensure it is secure. To find out how we use and store your data please read our privacy policy